Bathroom fans can be used for a variety of purposes, such as heating the home or cooling off after a long day. The old bathroom light can be a source of light that’s been inefficient for decades, and it’s time to get it fixed. Get a new bathroom light to get the most bang for your buck. You can buy new bathroom lights online or at local auto and home centers. If you can’t find old bathroom light, you can use a piece of old electrical tape to match the color of the new light. Before you get started, make sure the new bathroom light is inserted securely into its hole. If it’s not, the old bathroom light will collapse when it’s pumped up. Here’s how to remove the old bathroom fan light.
Turn Off Power
To complete the removal process, you need to turn off the power. Unplug the electrical plug from the circuits in the bathroom, and then unplug the plug from the wall outlet. Turn off the water heater and the toilet flush, and then unplug the supply from the wall and off the house-various circuits. Next, disconnected both the electrical and water lines from the home. Now, use a clamp saw to remove the old light from the wall. While it’s still warm, remove the old light bulb. Follow the same procedure for the new light, ensuring that the old light is still connected to the house’s electrical circuits.
Remove Cover Old Bathroom Fan and LIght
The best way to remove the old bathroom fan light is to use a soldering iron to heat it up. Once the heat is removed, the light will come out of the wall socket with an electrical conformation. You can then use an ordinary screwdriver to remove the old light. Be sure to check the continuity of the old light as it will short-circuit when it’s disconnected.
Remove Light Lens
The old bathroom light had a lens that rotated around the housing, but the new light doesn’t. To get the old light lens out, you need to remove the old light lens. The old light lens is the black plastic part, while the new light lens is the white plastic part. To remove the old light lens, use a heat gun, which will melt the plastic part in the lens. Then, use a flat-blade knife to cut the plastic off.
Remove the Fan Assembly
The old bathroom fan isn’t the same as the new bathroom fan. The old light bulb had a swivel, while the new light bulb has a rotating part. To get the old light bulb out, you need to remove the old fan. You can use a drill or drill head to remove the old fan, but drills with a head is much harder to remove. A box-flooder is ideal for removing the old fan.
Unfasten The Metal Housing
The old metal housing was clamped in with a lock nut, but the new metal housing doesn’t have a lock nut. This is the part that rotates when the old light is on. To get the old light out, you must untie the metal housing from the frame of the bathroom light. Then, use pliers to remove the old light bulb, and then use a box-flooder to remove the old fan.
Disconnect The Duct
The old bathroom light has a ventilating system, which makes the air inside the bathroom cooler than the air outside the bathroom. The new bathroom light has no ventilating system, so the air inside the bathroom gets hot, and the air outside the bathroom gets cold. To get the old light off, you need to disconnect the duct in the bathroom. This is a small job that can be done by yourself, and it’s what this article is about.
Disconnect The Wiring
The old bathroom light had a pull-out switch that you needed to connect to the new bathroom light to mask the sound of removing the old light. To do this, you need a multimeter and multiple connectors. Then, unplug the old bathroom light, and connect it to the new light. Check the continuity of the new light, and then re-solder the breakaway-out wire from the new light.
Remove The Fan Housing
The old bathroom fan was a deep-cycle design, but the new bathroom fan uses a light fixture instead. To get the old fan out, you need to remove the old fan. The old fan has a housing that holds the light, and the new light fixture has a different housing. Then, use an appraisal to remove the old light bulb, the fastener screws, and the old fan.
Final Thoughts
The old bathroom light can be a source of light that’s been inefficient for decades, and it’s time to get it fixed. Get a new bathroom light to get the most bang for your buck. You can buy new bathroom lights online or at local auto and home centers. If you can’t find old bathroom light, you can use a piece of old electrical tape to match the color of the new light. Before you get started, make sure the new bathroom light is inserted securely into its hole. If it’s not, the old bathroom light will collapse when it’s pumped up. Here’s how to remove the old bathroom fan light. Read More.